Showing 1 - 4 of 4 results
The 12V DC Diaphragm Water Pump provides high volume water flow with reduced pump cycling, thanks to the quad chamber diaphragm and internal bypass. These models are designed to run on water systems with no accumulator tank necessary, and up to five outlets. It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin. It provides up to 4.5 gallons per minute, suitable in a system of up to five fixtures. The 12V DC Diaphragm Water Pump are self-priming, and can run dry without damage, performance reliable and low current. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when faucet is opened and closed. They're easy to install service and winterize with quick snap-in port fittings.FeaturesSmooth operationSelf primingSilent runningLow power drawRuns dry without damageEasy connecting systemDuty Cycle: IntermittentSpecificationsFlow:...
The Bilge pump offers various features while keeping the size and cost to a minimum. It has heavy duty motors with stainless steel shafts and tough thermoplastic bodies. The pumps are extremely efficient, low current draw with very high capacity for such a compact unit, and it will fit into the smallest available space. The pump is totally submersible and ignition protected. The snap-lock strainer base allows easy installation and removal, and silent vibration-free running.FeaturesExclusive moisture tight sealsCompact, efficient, long life motorsEasy clean snap lock strainersQuiet operationNo burn-out when run dryStainless steel shaftsRust and corrosion protectionTraditional operation by switch or float switch110°F (43°C) temperature limitsSpecificationsVoltage: 12VDelivery Volume: 2000GPHMax. Delivery Head: 6mMax. Draw:8.5ACable: 100cmWeight: 1.2kg
This durable and weather-proof bilge water pump has all the features that you could hope for; from the built-in float switch, the hard-bodied thermoplastic ABS strong moisture proof sealed enclosure, which can withstand maximum liquid temperature of 43 degrees.The pump and switch are integrated, and the switch can be automatically controlled according to the water level, without floating switches to make fully automatic operation easy. No separate float switch is needed and relay loop design protect the pump against instant high current. It's also energy saving as no power use until pump turns on when water rises.The pump can use in Marine,Medical,Pond,Water Research etc.FeaturesExclusive moisture tight sealsCompact, efficient, long life motorsEasy clean snap lock strainersQuiet operationStainless steel shaftsRust and corrosion protectionTraditional operation by switch or float switchQuiet operation110°F (43°C) temperature limitsSpecificationsVoltage: 12VMax. Delivery Head: 4mMax. Draw:3.0ACable: 100cmWeight: 0.5kg
This 5.5hp 2-inch high flow water pump provides outstanding performance for general water pumping applications. Featuring 50mm (2”) inlet / outlet and a class-leading flow rate of 30,000L/h with a total of 30m, the hardworking water pump is coupled with a powerful 196cc, 3600rpm 4-stroke engine that easily transfer water up to 8m. Other great features include easy start pull system, easy usage, shock-absorbing and noise-reducing rubber feet as well as compact designs. FEATURES5.5hp high flow water pumpFlow rate of 30,000 L/h (500L/min)Full 50mm (2”) inlet / outletAnti-corrosive alloy pump housingCeramic and carbon sealsGearless direct driveSolid impellerAnti-shocking and noise-reducing rubber feetUltra-fine air filterBonus hose fittings and inlet filterSPECIFICATION4-stroke engineEngine power: 5.5hpDisplacement: 210ccFlowing volume: 30,000 L/h (500L/min)Fuel capacity: 3.6LFuel type: Regular unleadedSpeedy: 3600rpmOutput & input size: 50mm (2”)Max. delivery lift: 30mSuction: 8m